WARING: DO NOT use this wiring diagram when wiring W-8,W 18,W-28 or W-80 wall controls. This will cause damage to both the PC Board and Wall Control.   IMPORTANT NOTE: The fan must be supplied with two independent 120V AC supply wires to provide power for the fan, the light, and neutral. Installation is to be in accordance with all National Electrical Code and local codes

The fan may be turned ON and OFF by the W-150 wall control. The lights may be turned ON and OFF by the W-150 and the intensity adjusted from low to high. The fan must be supplied with two independent 120V AC supply wires. Set the FAN pull chain switch to the HIGH speed setting. Turn the lights ON (with the light pull chain switch). The W-150 allows the choice of three (3) different speed settings.