W14 / W24 Operation

W-24 / W-14 CEILING FAN CONTROL

W-14

W-24 / W-14
Attractive single slide optional fan only control.

Noise-free circuitry and quiet operation
Four optional fan speed settings
120VAC, 60Hz, 1.5Amp rating
Will operate one fan only

The W-24 wall control provides three-speed control of fan from a convenient wall location. The W-24 is designed to replace a standard wall switch and will fit wall boxes with a depth of 2" or greater. Not for use with single pull-chain fan/light option wiring.

To install a W-24 wall control in place of an existing wall switch, follow the instructions on the W-24 package.

NOTE: No rewiring is required if the fan is replacing an existing light fixture. Operation of the fan from the wall switch is simple: 1. Raise the slider to obtain desired speed setting.

OPERATION

1. Raise slider to increase fan speed, lower to decrease.
2. Four speeds are available: Low 1, Low 2, Medium, and High. The bottom position is OFF.

CAUTION! Failure to set the pull-chain speed to HIGH can result in faulty operation of the fan and damage to the wall control. To confirm fan is set to HIGH: Turn W-24 fan speed switch to `HI' - set fastest fan speed with pull chain.

FILE NAME ( W24CONTROLS.PMD) RAS 12-22-04