Wiring Diagrams

Inteli-Touch®
W-32 Wall Control Installation (3-Way Installation Instructions)

( Figure #6

Once both toggle switches have be removed from the wall, it is time to install the W32 Wall Controls. 5. Locate the BLACK WITH WHITE STRIPE wires as shown in (Figure #7). They will be located on the back of the W32, DO NOT use the black with white stripe wire, that is wire nutted to the blue wire. Connected the black with white stripe wire from the top of the back of the W32 to the HOT wire coming from the power source. Also shown in (Figure #7).		( Figure #7)
6. Locate the TWO (2) BLACK wires located at bottom and back of W32 as shown in (Figure #8). Connect these two wires to the TRAVELER WIRES also shown in (Figure #8).		( Figure #8)