Inteli-Touch® W-32 Wall Control Installation (3-Way Installation Instructions)
( Figure #6
Once both toggle switches have be removed from the wall, it is time to install the W32 Wall Controls.
7. Locate the BLACK WITH WHITE STRIP wires as shown in (Figure #9). They will be located on the back of the W32, DO NOT use the black with white strip wire, that is wire nutted to the blue wire. Connected the black with white strip wire from the top of the back of the W32 to the HOT wire. Also shown in (Figure #9).
( Figure #9)
8. Locate the TWO (2) BLACK wires located at bottom and back of W32 as shown in (Figure #10). Connect these two wires to the TRAVELER WIRES also shown in (Figure #10) NOT: - DO NOT install the switches in wall until after testing. If the light button operates the fan and the fan operates the lights you will have to make the change in the wiring as shown in (Figure #12).
( Figure #10)
Wall Control Replacement - CONTINUED
To Find a Service Center Near You
Call Toll Free: 1-888-227-2178
