13/16 SOCKET
WRENCH

|

PHILLIPS HEAD
SCREWDRIVER

INSTRUCTION
SHEET
PART # 1943491

STEP #1

Locate the nut holding the reflector pan and with the 13/16 socket wrench, remove the nut as shown. Save the nut, the nut will be needed to attach the center shaft adaptor back on to the center shaft.

STEP #2

Once the nut has been removed from the center shaft, the reflector pan and washer can also be removed as shown. Make sure that the brass bushing does not fall off of the center shaft.You will also need to use the bushing later. If you have not done so already, remove the two (2) porcelain wire nuts from the BLACK and WHITE wires, save both the nut and the two (2) porcelain wire nuts, they will be needed later.

PORCELAIN WIRE NUTS

Old reflector pan removal - END