blade. Do the same for all blades and note on which blade the clip reduces the wobble most. Place the clip on the blade which showed the most improvement. Then, to find the position which most improves the wobble, move the clip in and out along the blade, by trial and error, as shown in (Fig # 10). Once the exact position is determined, you will need to reverse the fan. If the wobble has stopped in both directions, place a weight on top of the blade, on its centerline, directly inline with the clip as shown in (Fig #11) . Peel the paper off of the back of the weight and press firmly to ensure that it is securely attached to the blade. Remove the clip and discard, as shown in (Fig #12) . Turn the fan on. No wobble? Congratulations, you're done! Still some wobble in one direction or the other? You may have to fine tune the balance of your fan . Fine tuning is covered on the next page.

( Fig #12 )

Wobbling and Rocking Fans - ( CONTINUED )