FINE TUNING YOUR CEILING FAN:

The procedure of fine tuning the balance of your ceiling fan requires a little more trial and error. So again, be patient, you are almost done. Turn the fan on (use the speed that causes the most wobble) in either the forward or reverse direction.

Start by placing the clip back on to the blade. Position the clip on the center line of the weight as shown in ( Fig #13 ) and remove the weight. Using a ruler, move the clip 1" (one) inch towards the tip of the blade, as shown in (Fig #14). CAUTION: Be careful to stay clear of the blades when running. If the clip is not secure, injury may result from the clip flying off. Turn the fan on (use the speed that causes the most wobble). Observe if the wobble is better or worse in both directions. If the wobble has worsened, you will have to move the clip in the opposite direction. Turn the fan off , again using a ruler move the clip 1 1/2" ( one and a half ) inches back towards the blade holder, as shown in ( Fig #15 ). Turn the fan on again, test in both in directions. No wobble? Congratulations, you're done! Place the weight back on the blade and press firmly to ensure it is securely attached. Remove the clip and discard as shown in ( Fig #16A and 16B).

( Fig #16A )

Wobbling and Rocking Fans - ( CONTINUED )