Wall Control Replacement - CONTINUED

 

CHECK YOUR WORK: NOTE: If your wall control operation is reversed, i.e., fan switch controls lights and light switch controls fan, simply swap the two W-32 black/white stripe wires. Locate the BLUE wire that is wire nutted to BLACK WIRE WITH THE WHITE STRIPE as shown, remove the wire nut. Now locate the BLACK HOT WIRE that is attached to the other BLACK WIRE WITH THE WHITE STRIPE wire, also remove the wire nut. Switch the wire as shown and wire nut them together.

---

Inteli-Touch Controls

INTELI-TOUCH DUAL W-32 INSTALLATION

The Inteli-Touch control makes possible the remote control of all ceiling fan and light functions from one or two convenient wall locations. At the heart of the Inteli-Touch control is a microprocessor located within the fan housing. This unit decodes and stores the commands sent from the wall controller (W32 and W-33). The wall control takes the place of the conventional wall switch and eliminates pull chains, switches and knobs from the fan body.

W-11 & W-12 Controls (Original I•T Fans) 1983 - 1992

W-32 & W-33 Controls 1992 - Current

 

 

Inteli-Touch Wall Control - CONTINUED