Fan Control

To start the fan. press the selected speed button to run the fan at the desired speed.

LO=Low speed MED=Medium speed HI=High speed

To turn off the fan, press the FAN OFF button.

Airflow Direction

To reverse the airflow press the REVERSE button. Reverse operates at any speed whether fan is on or off. The fan returns to its set speed after reversing.

Light Control

Turn the light on or off independently from the fan by pressing the UP LIGHT, DOWN LIGHT, OR BOTH button. (This is a rocker switch. Press the left side for the Up Light, right side for the Down Light, and the middle for both.) Hold the button in excess of 0.7 seconds, it becomes a dimmer. The light varies from `bright' to `dim' over approximately 8 seconds. This sequence will reverse the light when it reaches the brightest or dimmest level if you continue to hold the LIGHT button. Release the button when the desired level is reached.

Auto Resume

Quick press (less than 0.7 seconds) on/off operation of the LIGHT button maintains the desired brightness level set previously.