All wiring must be in accordance
with the National Electric Code ANSI/NFPA 70-1993 and the
appropriate local electrical codes. The National Electric
Code requires proper grounding as a precaution against electrical
shock. A qualified electrician should be consulted if you
This fan is designed to be installed
on an existing electrical outlet box. The outlet box must
be UL Listed for ceiling fan installations, if it is not,
a new box must be installed. Casablanca extension poles
are available for sloped or high ceiling installations.
This ceiling fan requires a
grounded electrical supply of 120 VAC, 60 Hz and a minimum
15 amp circuit. The maximum current requirement for the
fan with light fixture is 3.8 amps. The fan uses about 1
amp or 100 watts. Maximum light current is 2.8 amps or 340
watts of lighting.
Where wire nuts are employed,
be sure all bare wires are within the connectors. When installing
the canopy hatch, make sure all wires are within the canopy
and that no wires are being pinched.
For best performance
and for your warranty to be valid,
use only genuine Casablanca blades, light fixtures, and
starting the installation of your ceiling fan, install
the threaded downrod into the motor coupling and lock
NOTE: Failure to do so could cause the fan to fall.