Versa Touch
Hang Tru - Perma Lock
Installation Instructions
BEFORE INSTALLING THE BLADE HOLDERS & BLADES
Step 7.
Install the assembled blade and blade holder to the flywheel (round holes) or direct drive motor. Hand tighten securely.
Repeat for each assembly.
How to check if the receiver and transmitter dip switch to see if they are on the same frequency setting.
VERSA • TOUCH © CONFIRMING CHANNEL DIP SWITCH SETTING- CONTROL
Remote Setting
Step 1.
Remove battery.
Step 2
. Check that the dip switch in the remote is set to `00000' - as shown.
Step 3.
Check that the dip switch in the fan is set the same.
(See section below for fan dip switch location)
Page 3
To Find a Service Center Near You
Call Toll Free: 1-888-227-2178
How
to check if the receiver and transmitter dip switch to
see if they are on the same frequency setting.
