| The
Home-Safe Program makes an unoccupied home appear occupied
by turning the lights on and off at random times.
To enter the Home-Safe
Program:
1. Turn the
off for at least three seconds.
2. Turn the
on.
3. Immediately operate the buttons in the following sequence:
+
+
+ 
4. A tone and flashing
light indicate this command has been accepted.
This program overrides all manual control of lights and
fan. The lights will now be automatically cycled on and
off in a controlled sequence as follows: On 1 hour, off
1/2 hour, on 2 hours, off 1 hour, on 1/2
hour then off 2 hours.
This seven hour pattern
will repeat continuously so that a different pattern of
lighting is seen each day of the week.
To cancel the Home-Safe
Program, turn the
off for three seconds. |