Wall Controls - CONTINUED

VERSA • TOUCH © PLACING CONTROL ON TO THE HOLDER

Control Storage

Angle control in top first until the unit can be gently pushed back and snapped into place.

 

 

Removing Control

Gently Pull the lower edge of the control out from the holder.

VERSA • TOUCH © (W-72) IF FAN DOES NOT WORK

If the fan is not functioning after installation:

Step 1. Check to make sure that batteries are installed correctly in the control.

Step 2. Turn the power off to the fan (from the circuit breaker) for at least 5 seconds.

Step 3. Turn the power back on (at the circuit breaker) and push the Hi, Med, and Low buttons_in that order_within 20 seconds.

 


Circuit breaker
or Fuse Box

 

PRESS IN THIS ORDER TO SET NEW FREQUENCY:

1. HI 2. MED 3. LO


VERSA • TOUCH © (W-73) IF FAN DOES NOT WORK

If the fan is not functioning after installation:

Step 1. Check to make sure that batteries are installed correctly in the control.

Step 2. Turn the power off to the fan (from the circuit breaker) for at least 5 seconds.

Step 3. Turn the power back on (at the circuit breaker) and push the Hi, Med, and Low buttons_in that order_within 20 seconds.

 


Circuit breaker
or Fuse Box

 

PRESS IN THIS ORDER TO SET NEW FREQUENCY:

1. HI 2. MED 3. LO



P. 3
To Find a Service Center Near You
Call Toll Free: 1-888-227-2178